Automatic Color Plate Trapezoidal Roof and Wall Panel Roll Forming Machine Building Materials Equipment
Product Description Basic Info. Product Description Color Steel Tile Roll Forming Machine for Wall 910 Processing flow d
Send your inquiryDESCRIPTION
Basic Info
Model NO. | HX Color Plate Forming Machine 910 |
Transmission Method | Machinery |
Product Description
Product Description
Basic Info.
Suitable material | Colored Steel plate, Galvanized Board,Aluminum Plate | Main Frame | 350mm H steel |
Width of the raw material | 1000mm | Middle plate | 16mm |
Thickness | 0.3-0.8mm | Wheel | 45# steel |
Dimensions (L*W*H) | 5000*1200*1200mm | Chain | 1 inch |
Total power | 4kw+4kw | Voltage | 380V 50HZ 3PH (or as Your Requested) |
Rows of rollers | 9 rows | Weight | 2.8T |
Productivity | 8-15m/min (or as Your Requested) | Material of Wheel | Ball Bearing Steel |
Diameter of shaft | ¢70mm | Color | as Your Request |
Product Description
Color Steel Tile Roll Forming Machine for Wall 910
Processing flow diagram of machine:
Decoiler→ Feeding →Roll forming →Measure length →Hydraulic cutting →Output table Packaging & deliveryPackaging DetailsImportant Components Wiped with Anti Rust Oil, Rollers and Shafters covered by foam film,Hydraulic station PLC control Box Spare parts and some small parts packed in plywood box,All Components Fixed by steel wire in Container.Port:tianjin port
Lead time:
Quantity(sets) | 1 - 1 | >1 |
Lead time (days) | 45 | To be negotiated |
Product Picture Description
Manual Uncoiler
It is used to support the steel coil and realize the uncoiling by means of rotatory movement. The steel coil is uncoiled manually. The capacity of this uncoiler is 5 Ton, and it is capable for most of the cases. This equipment is suitable to process the steel coils with 508mm of ID.
Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Power:4kw
Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:delta
Cutting system
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 with quenching treatment
Our service1. Our machine warranty is 1 years (non-man-made damage, accessories, technical support)2. Technical guide is provided during whole life of the machine.3. Oversea services will be provided but any cost thus incurred will be paid by the buyers.4. We support customers inspect our factory or machines by video call.5.After customer inspect the factory,if need translator service,we also can supply this service for free(English).6.Customer LOGO,Tel, can customize on our machines.7.Voltage can customize according to customer's requirement.8.If need raw material,we can supply the good suppliers for steel coil, aluminum coil,steel strip and so on.9.If need more machine pictures or videos,please contact us soon.10.we just can supply the sample produced by our machine; it is not machine sample, please get to know this.About Us
Related Products
-
PPR Electrofusion Coupler Fitting Building Materials Electrofusion Fusion Welding Equipment
-
Construction Equipment Building Material Machinery Brick Making Qt 10-15 Hollow Block Making Machine Price
-
Vocational Training Equipment Thermal Conductivity of Building Materials Fluid Vertical Hydrodynamics Lab
-
Construction Building Material Drywall Stud and Track RollForming Equipment